Clinical Evidence

Agile Nail™

Important safety information: Download the Product Instructions For Use.

The Agile Nail™ is a rigid implant made of titanium alloy, designed for femoral fracture treatment and deformity correction procedures. It is inserted in the intramedullary canal of the bone from the tip or slightly lateral to the tip of the greater trochanter and fixed to the bone with locking screws. The implants are available in several sizes to fit the bone anatomy of the patient.

Ankle Hindfoot Nailing System™

Important safety information: Download the Product Instructions For Use.

The Orthofix Ankle Hindfoot Nailing System (AHN) is designed to be used for the fusing and fixation of bones in the ankle.

eight-Plate Guided Growth System™

Important safety information: Download the Product Instructions For Use.

The Guided Growth System eight-Plate and quad-Plate is an implant system designed to correct pediatric deformities (congenital or acquired) in lower limb, like genu valgum and varum, and limb length discrepancies. The plates are attached to the external surface of the bone over the growth plate by two or four screws depending on the plate selected by the surgeon. The implant acts like a flexible hinge, permitting growth at the growth plate to gradually straighten the limb when the physis (growth plates) are not fused. The screws are not locked to the plate but rather are allowed to swivel and diverge in their positions as the bone grows. Immediately after implantation, the patient is allowed mobility and weight bearing.

eight-Plate Guided Growth System+™

Important safety information: Download the Product Instructions For Use.

The eight-Plate Guided Growth System+™ is an implant system designed to correct pediatric deformities (congenital or acquired) in lower limb, like genu valgum and varum, and limb length discrepancies. The plates are attached to the external surface of the bone over the growth plate by two or four screws depending on the plate selected by the surgeon. The implant acts like a flexible hinge, permitting growth at the growth plate to gradually straighten the limb when the physis (growth plates) are not fused. The screws are not locked to the plate but rather are allowed to swivel and diverge in their positions as the bone grows. Immediately after implantation, the patient is allowed mobility and weight bearing. The eight-Plate Guided Growth System+ offers more sizes and different screw types compared to the standard eight-Plate Guided Growth System, as well as an increased screw angle to treat very difficult cases.

Fitbone™

Important safety information: Download the Product Instructions For Use.

The FitboneTM Intramedullary Limb-Lengthening System was developed in partnership with Professor Baumgart.  The product was launched in 1997.  Since then, this innovative treatment concept has grown into a global success story. The Fitbone TAA Intramedullary Lengthening system is intended for limb lengthening of the femur and tibia. With appropriate pre-operative planning, it is possible to ensure good limb alignment so that the limb is correct at the end of lengthening.

G-Beam™

Important safety information: Download the Product Instructions For Use.

In beaming, a large diameter cannulated device distributes the axial load of the bone between fixation points, which helps hold a joint or osteotomy until it heals.

JuniOrtho™ Plating System

Important safety information: Download the Product Instructions For Use.

The JuniOrtho™ Plating System (JPS) is a pediatric range of stainless steel plates designed for surgical treatment of deformities and trauma reconstruction in lower limb. The JPS plates can be used for correction of congenital deformities in femur and tibia (varus, valgus, rotational and/or shortening of the lower limb) and for the treatment of articular fractures.

LRS ADVanced™

Important safety information: Download the Product Instructions For Use.

The Orthofix Limb Reconstruction System™ (LRS) is a series of modular monolateral external fixators used in reconstructive procedures for treatment of short stature, bone loss, open fractures, non-union, and angular deformities.

MiniRail

Important safety information: Download the Product Instructions For Use.

The MiniRail External Fixation System consists of small rails and screws for fixation of small bones when a condition does not allow for implanting internal devices. The MiniRail is designed to help with a variety of deformity corrections and lengthening procedures of small bones and joints in the foot and upper limb.

RIVAL™ Bite Compression Screws™

Important safety information: Download the Product Instructions For Use.

The RIVAL Bite Headed Cannulated and Headless Compression Screw System consists of titanium alloy screws for the fixation of fractures, osteotomies and joints of small bones affected by injury or disease. The screws are available in a wide range of sizes to fit a variety of patient sizes and anatomies and are designed to reduce possible post-surgical irritation due to its low profile head.

RIVAL™ View Plating System™

Important safety information: Download the Product Instructions For Use.

The RIVAL View Plating System consists of a range of titanium plates and screws for the fixation of small bones and joints for select anatomical areas of the foot. The plates are designed to address specific procedures for the correction of bones or joints in the foot that may have been affected by injury or disease.

SOLE™ Medial Column Fusion Plate

Important safety information: Download the Product Instructions For Use.

The SOLE Medial Column Fusion Plate System consists of stainless steel plates and screws, and is designed for the fixation of small bones and joints in the foot. The plates and screws are made for complex reconstruction procedures like Charcot foot.

TL-HEX TrueLok Hexapod System™

Important safety information: Download the Product Instructions For Use.

TL-HEX is a dynamic, 3D external fixation system that combines hardware and software to correct bone deformities. This hexapod-based system functions as a 3D bone segment-repositioning module. In essence, the system consists of circular and semi-circular external supports secured to the bones by wires and half-pins, interconnected by six struts.

TrueLok™

Important safety information: Download the Product Instructions For Use.

The Ilizarov System has experienced many modifications over the last fifty years. The TrueLok™ Ring Fixation System, developed at Texas Scottish Rite Hospital for Children (TSRHC) in Dallas, Texas, is one of the modern variants of the original fixator, but preserves many of the original principles of Professor Ilizarov. It consists of aluminum rings available in different sizes, connected to the bone through metal wires or/and bone screws. The relative movements of the rings allow the correction of almost all the bone deformities in upper and lower limbs and in the foot.